Natural cork insulation roll (10m*0.5m=5 m²) thickness 2mm

NOMA® NATURE is a natural thermal and acoustic cork roll insulation for protection against noise and cold. NOMA® NATURE is a natural and 100% recyclable product for insulating walls and floors.

Dimensions: 10,000 mm x 500 mm x 2 mm

Surface to be covered: 5 m²

Thermal and acoustic uses:

• Wall Insulation
• Floor insulation
• Decorative

Product properties:

• 100% recyclable and non-harmful
• No pollution and no toxicological effects
• High punching resistance, long service life
• Compatible with underfloor heating
• Storage: up to one year, without exposure to sun or weather

Technical data:

• Cork material Thickness (nominal): ± 2 mm / ± 4 mm
• Density: 145-220 kg/m3 (ISO 7322)
• Sound reduction index: (ISO 140 & 717) 2 mm: 17 dB 4 mm: 19 dB
• Footstep noise reduction: > 7%
• Thermal resistance: R at 40°C 0.053 m2K/W (ISO 8301)
• Fire classification: Euroclass E

Installation tips:

As cork is a natural product, it is recommended to adapt it to the ambient temperature of the room 24 hours before installation. FLOOR UNDERLAY:

1. Before laying, it is important to ensure that the cement is flat, clean, dry, strong and stable and that it does not have any cracks (according to DIN 18365). In the case of residual moisture and mineral-based subsoils (e.g. cement), we recommend using a PE vapour barrier film of at least 0.2 mm thickness on the floor.
2. Unroll completely and place the strips one on top of the other without leaving any space. Stick them together using adhesive tape (NOMA®PARKETT ADHESIVE & FIX).
3. Then proceed with the floating installation of the parquet/laminate flooring.

WALL UNDERLAYER:

1. Before installation, make sure that the surface is clean, flat and dry (it is recommended to remove the old covering). On new or porous walls, apply a bonding primer to facilitate wallpapering and removal.
2. Coat the wall with NOMA®COLL CORK (cork glue) using a 2.5 mm-3 mm notched trowel (allow +/- 600 g of glue per m²).
3. Cut the strips a little longer than necessary and place them on the still damp surface. Smooth with a wallpaper brush or rubber roller. Place the following strips edge to edge. If necessary, apply calico (NOMA®FIX) to the joints.
4. Allow to dry for 48 to 72 hours before applying the coating.

TIP: We recommend applying an acrylic primer before hanging the wallpaper.