NOMA® THERM FLEECE is an insulating wall underlay made of expanded polystyrene covered with a canvas. Cuttable and paintable, it is the ideal base support for your wallpaper, decorative coating or paint, thus guaranteeing you improved insulation of your space.
Product properties:
- Thermal insulation
- Creates an ideal base for wallpapering
- Reduces heating costs
- Improves the living climate
- Increases the surface temperature of the walls
- Covers wall irregularities
Technical data: *compared to a wall thickness of 23cm
- EPS (expanded polystyrene) composite material and a canvas
- Thickness 4mm
- Thermal resistance 0.100 m² K/W at 10°C
- Insulating effect 23% less energy loss *
- Euroclass E fire classification according to EN 13501-1 (when used on non-combustible mineral substrates (class A1 or A2-s1d0) or wood-based substrates with a density greater than 300 kg/m3)
- Glue consumption ± 350 g/m2 DECOFIT
Installation tips :
- The surface must be clean and dry
- NOMA® THERM FLEECE can be cut with scissors or a cutter. The cardboard layer should be cut slightly longer than the polystyrene layer.
- Apply DECOFIT P glue to the wall surface across the width of the strip using a 2.5 mm notched trowel.
- Apply the cut strips with the polystyrene face against the wall, align and press firmly with a brush or rubber roller
- Cover the joints with NOMA® FIX (covering tape)
- Let dry for 24 to 48 hours
- NOMA® THERM FLEECE can be painted.
Please note: if you apply a coat of paint, the joints may be visible.
